How AssetPulse helps in Laboratory Relocation

Laboratory Relocation Services
  • Is your company growing?
  • Are you moving into new buildings?
  • Consolidating labs?

Either way, there is a likelihood that your labs are being relocated. Laboratory relocations present a unique set of challenges and are huge headaches for lab managers. First, lab managers need to have an accurate inventory of their equipment in their current labs – not only what they have, but also where everything is. Now that the lab managers have clear visibility of where each of the equipment is, they need to decide what equipment goes where, in the new location. Equipment has to be packaged and marked with care before they are moved. 

Laboratory Relocation Services

Unfortunately, mistakes are bound to happen. Packages are mislabeled.  Equipment is not delivered to the right lab. Well meaning personnel, will move packages out for legitimate reasons, without informing anyone. The lab manager has a tough time searching for misplaced equipment. These are not uncommon scenarios.

RFID Tracking Solution for Laboratory Relocation

One of our long-term customers who has implemented our RFID-based asset tracking solutions just went through a significant move. The complexity of lab instruments, regulatory requirements and the need to address lab workloads during a move is an exacting process. Inventory tracking and equipment location tracking is facilitated by AssetPulse Lab equipment tracking solutions.

With our RFID-enabled lab equipment tracking system, they had an accurate inventory of all their equipment and more importantly, where each of the equipment was located. They were able to plan the move efficiently – which equipment goes to which destination. Equipment was packaged. Some labelling mistakes were made. Equipment did get misplaced.

As part of the move prep, the major exit and entrance doors of the destination labs were already installed with RFID scanners. The RFID scanners on the doors of the original labs were retained, because they were going to be inherited by the new labs moving into that space. Since all the equipment had already been RFID tagged, , our RFID asset tracking system accurately tracked what equipment was moved, when and through which doors and when they entered the destination buildings.

Even if a piece of equipment was incorrectly delivered to a lab, our asset tracking solution alerted the lab manager of the error. So, they knew where exactly to go search for the equipment with a handheld RFID scanner. Since the RFID tags are able to be read through the packaging, they didn’t have to undergo the laborious processes of opening the packaging and trying to read the asset number of the equipment inside.

Laboratory Relocation Process – Smooth & Quick

With our RFID system, the entire relocation process, from planning through execution to completion, was a much smoother, much quicker and more painless process for not only the lab management personnel, but also for the users of the labs. This had direct impact on the business, because it not only made efficient use of personnel’s time, but also got the labs back on its feet quicker, so the business suffered minimal disruption.

With AssetPulse’s Lab Equipment Tracking System, laboratory relocation is not a worry anymore.

Looking for a Hassle-free Laboratory Relocation Process?

RFID Solutions Customized for your Industry

Contact Us

How AssetPulse assists in Lab Equipment Calibration Management

Timely lab equipment calibration is essential in the Biotechnology industry

1. Why is calibration important?

Given the enormous impact of the Biotech sector on the lives of billions of people, the industry takes every measure to ensure it conducts its research with accurately calibrated equipment.  Labs have to adhere to numerous regulatory compliance requirements to ensure their product integrity, which include proper instrument calibration in a timely manner.

A calibration certificate is issued for equipment after validation. This certificate contains key information such as a reference standard, last calibration date, next calibration due date, normal operating range of instrument etc. The calibration certificate is a mandatory document that is referred to prior to producing products. Should a problem arise in the manufactured product, information contained in the calibration certificate is key to determine when, where, and how the error occurred.

As with any manual process, keeping track of calibration-due-dates is subject to human error no matter how organized or careful lab personnel may be.

2. How AssetPulse RFID Asset Tracking Solution helps with Calibration Tracking?

AssetPulse’s RFID Asset Tracking solutions help address this problem.

AssetPulse software facilitates the entire calibration process – from determining which assets need calibration to physically locating them and to processing the post-calibration paper-work .

AssetPulse software proactively alerts users of upcoming calibration-due-dates – both via email as well as software alerts. Users are also able to query the system for a list of assets that need calibration in the near future. They can download the asset lists to mobile RFID readers, which enable them to quickly and efficiently locate equipment on the lab floor. The AssetPulse Geiger Proximity Search Feature on the RFID reader makes this search even more efficient.


lab equipment calibration

3. Maintain Lab Equipment Calibration records for easier reference

Once lab equipment calibration is complete, users can easily update the system with calibration dates and attach calibration certificates for the equipment. The AssetPulse System helps in calibration certificate traceability as it digitally stores calibration certificates, which means they are readily available in case of an audit. This alleviates the time-consuming manual process of searching through numerous paper folders in hopes of locating calibration certificates.

4. Keep track of equipment movement to and from Metrology

The AssetPulse RFID Tracking system also helps the lab managers and Cleanroom managers to track the movement of equipment through the calibration process. Equipment that goes to a third party for calibration can be tracked in the system. Alerts can be sent out if the equipment is not returned within a specified time. For equipment that goes to the Metrology area within the company, the lab manager can track in real time, when equipment enters the area for calibration and when it is completed and ready for pickup. Before using our solution, equipment would be left sitting on shelves ready for pickup, for weeks together.

Using the AssetPulse RFID-Enabled Asset Tracking software, our biotech and biomed customers have streamlined their calibration processes, whether they perform calibration in-house or they contract it out to third parties.

Looking for Asset Management Software?

RFID Solutions Customized for your Industry

Contact Us